What Is an AGO Oil Product or Automatic Gas Oil? Finding Authentic AGO Petroleum Supply/Supplier

A recent survey conducted by this writer on the Internet for a quick, snap shot sense of the subject matter, immediately revealed that there’s a state of relatively scanty knowledge of, or information about, this particular refined petroleum product called the AGO, among international oil dealers and suppliers. In deed, in one rather remarkable instance involving a popular ‘Ask for Answers’ online discussion portal, one reader expressly posited the question, soliciting information from the readers as to what is/was ‘the meaning’ of the petroleum term AGO, among three other refined petroleum products, which he went on to list – DPK, PMS, JET A1. There was just one response – a response that has stood the same for 5 years since. Oddly enough, however, of the 4 oil products that the answerer named, the answerer was exactly accurate in the definition he proffered on three of those. But, on ONLY one of them, the AGO product, the answer given by the answerer was somewhat slightly off, as he gave the definition of the product as meaning ‘Automotive Gas & Oils.’

So, first, we start with this basic question: What is AGO Oil Product, or the Automotive Gas Oil?

What the AGO Oil Product Is

The term AGO, which specifically stands for the Automotive Gas Oil, is the name given to the fuel type that’s used by road vehicles (cars, trucks, buses, vans, and the like) that are powered by DIESEL engines. That is, in a word, it is the diesel vehicle engine fuel. In terms of how the fuel gets to be produced or manufactured, the fuel is the type that, in the distillation and processing of crude oil work, is obtained in the mid-boiling range of that process. Related fuels which are used for non-road applications including off-road diesel engines, such as the Industrial Gas Oils (IGOs), are obtained from the same ‘fraction’ of the crude oil barrel.

Technically speaking, the term Automotive Gas Oil (AGO) is the technical name used by the oil industry in describing this particular fuel. However, in terms of the ordinary consumers in the market, the term ‘automotive diesel fuel,’ or just plain ‘diesel,’ is the more commonly used and more widespread name that the ordinary consumer uses in describing this fuel. Petroleum products are usually grouped into THREE categories: the ‘light distillates’ (LPG, gasoline, naphtha), the ‘middle’ distillates (kerosene, diesel), and the ‘heavy’ distillates and residuum (heavy fuel oil, lubricating oils, wax, asphalt). This classification is based primarily on the way crude oil is distilled and separated into fractions (called distillates and residuum). Within the oil industry, the generic oil industry name that’s used to describe gasoils – which include both AGO and IGO – fall under the ‘Middle Distillates’ category, meaning those kinds of refined oil products whose ‘boiling range’ fall in the MIDDLE, that is, between those whose range fall in the higher levels or in the lower levels. (See the Chart below). As you can readily see in the Chart below, at a Boiling Range of between 520 to 650, the AGO falls right in the middle range of most categories of the refined oil products.

The Market & Primary Uses of the AGO oil Product Among Its Customers

AGO is used in two main types of vehicles: 1) the heavy-duty vehicles, such as trucks and buses, and 2) the light-duty vehicles, such as vans and passenger cars. In most countries, including the USA as well as the developing countries, the heavy-duty vehicles make up the bulk of the market for AGO. In a country such as Japan, there is a significant light-duty vehicle sector, but it is in Europe that the demand for AGO from this sector is highest, with more than one-third coming from the passenger cars and other light vehicles. Customer requirements between the two types of fuel usage differ to some extent. Diesel engines are widely used in heavy-duty vehicles. Such vehicles are frequently operated in fleets and are re-fuelled centrally with the fuel delivered directly from the supplier. In the light-duty vehicle sector, recent advances in engine design now also allow light-duty diesel engines to compete with gasoline engines in terms of the performance standards. Light-duty vehicles are generally re-fuelled through retail outlets. In any case, whether it is in the light-duty sector or in the heavy-duty sector, in both sectors the customer will generally be looking for the fuel that provides economy, power, reliability and environmental acceptability.

Use As Car Fuel

Diesel-powered vehicles, such as AGO-powered vehicles, generally have a better fuel economy than equivalent gasoline engines and produce less greenhouse gas emission. Their greater economy is due to the higher energy per-liter content of diesel fuel and the intrinsic efficiency of the diesel engine. True, petrodiesel’s higher density results in higher greenhouse gas emissions per liter compared to gasoline. However, the modern diesel-engine automobiles have a 20-40% better fuel economy, and this well offsets the higher per-liter emissions of greenhouse gases, while a diesel-powered vehicle emits 10-20 percent less greenhouse gas than comparable gasoline vehicles. Biodiesel-powered diesel engines offer substantially improved emission reductions compared to petrodiesel or gasoline-powered engines, while retaining most of the fuel economy advantages over conventional gasoline-powered automobiles.

How Crude Oil Fractions Are Processed Into Refined Oil Products, Including AGO and Other Products

How do we get to have refined petroleum products, of which a product like AGO is one? Put simply, it is out of the refinery processing (i.e., out of the ‘refining’) of crude oil that many other usable products – products that we generally refer to as refined or finished petroleum products – are produced. Meaning products such as gasoil, gasoline, kerosene, AGO, etc. The process of oil ‘refining’ or processing is a very complex one, and involves both chemical reactions and physical separations. The substance that’s called Crude Oil is composed of thousands of different ‘molecules,’ and according to chemical engineers and molecular experts, it would be nearly impossible to isolate every molecule that exists in crude oil and thereby make finished products from each molecule.

Consequently, the way chemists and engineers deal with this problem, is simply by them isolating the mixtures (also called ‘fractions’) of molecules according to what is known as the mixture’s “boiling point range.” For example, molecules for the gasoline product might boil within the ‘range’ of from 90 to 400 oF. While the range at which the home heating oil product’s molecular mixes could boil might be from 500 to 650 oF, and so on. For purposes of convenience and simplification, each mixture or fraction is assigned a specific name to identify it.

The following chart illustrates the ‘boiling range’ and name of the petroleum fractions.


Boiling Range,oF.

Butanes and lighter


Light straight run gasoline (LSR)

or light naphtha (LN)


Naphtha or heavy naphtha (HN)




Distillate or atmospheric gas oil (AGO)



650 +

Vacuum gas oil (VGO)


Vacuum Residua

1000 +

In sum, refined products are products that are produced by isolating the mixtures or fractions of molecules that come from the raw crude oil, and combining them, along with those from various refinery processing units. These fractions are ‘blended’ or mixed to satisfy specific properties that are important in allowing the refined product to perform in accordance with the specifications or requirements that are designed by or in an engine, in terms of ease in handling, reducing the undesirable emissions produced when the product is burned, etc


Simply stated, the KEY term and task here is finding an authentic AGO oil product supply or supplier. Or an AGO buyer, as the case may be. Why? This is simply because, today, in the international refined oil products trading market, specially in the so-called “secondary” market, probably the single most fundamental and most difficult common problem which legitimate dealers who seek to find reliable suppliers have, is often NOT so much finding a party who will claim heaven and earth that he/she has the AGO oil product to sell and can supply you the product. Or that he can buy one from you, as the case may be. BUT finding such a party who is actually AUTHENTIC & LEGITIMATE, and can actually DELIVER on the product.


A well-established reality and a given today, is that in world oil deals involving trading in the crude oil and refined petroleum products, specially in the so-called international “secondary” market, probably the single most fundamental and most difficult common problem which legitimate buyers frequently confront today, is the problem of the genuineness and authenticity of the supplier of product and his ability to deliver on the sales offer he presents. Refined petroleum products, such as AGO, D2, Mazut, Jet fuel, etc., are certainly not immune or exempt from such endemic problem that seems to plague the entire secondary market oil trade industry, but rather are, in deed, right in the middle of it.

It’s a problem whose central source can simply be summed up in one word – namely, that not unlike most persons or entities who claim via the Internet to be oil or petroleum products suppliers or “sellers,” most who claim to be suppliers of AGO, as well (or of similar refined oil products, such as the diesel gasoil or Russian D2, Mazut, Jet fuels, and the like), either provide NO proofs or evidence at all of that, or provide proofs or evidence that are often absolutely meaningless because they’re unverified and unverifiable. That is, for the serious or credible Internet petroleum buyer involved in the world oil deals and seriously intent on finding duly verifiable authentic AGO oil product supply or supplier, there are generally just NO such supply or suppliers of the product in the so-called “secondary” market.

Most such serious or genuine AGO buyers (or suppliers, as well, as the case may be) seeking to find equally genuine AGO suppliers (or sellers seeking buyers, when applicable) in the international secondary market, find that the problem is particularly acute and compounded by the fact that almost all “sellers” (or suppliers), or their brokers or intermediaries, that one meets on the Internet, are essentially unknown, unestablished dealers who lack any name, reputation or identity, or any known location on the planet, and lack any record or history of past performance in doing the business. In consequence, a serious AGO buyer, for example, is often being asked – and actually being realistically expected – to, in effect, merely take “the word” of some dubious, anonymous, unidentified and apparently unidentifiable, phantom “seller” or “supplier” for it, with no credible supporting evidence provided, and no verification or authentication whatsoever of the Internet seller’s offer or claims.

In sum, he’s being asked – and actually being expected – to risk, or, rather, to gamble away, his hard-earned mini-fortune of some hundreds of millions of dollars merely on such a “word.”! This, it should be added, is being expected of the buyer in a business environment and climate that is patently awash in fraud and a network of notorious scammers worldwide!


Clearly, then, if you are a real buyer of product seriously intent on finding authentic diesel AGO oil product supply or suppliers (or those of any similar refined oil products, such as the diesel gasoil or Russian D2, Mazut, Jet fuels, and the like) – meaning one that is duly verified and verifiable – probably the most critical, vital, even life-or-death task for you, is that you had better be sure to develop, in some way or manner, a skilled and effective strategy for finding, vetting, selecting out and authenticated suppliers that can provide you reliable steady supply of the product, and which will be scam-free, assured, and long-lasting.


Quite oddly enough, the answer to that question is actually not that complicated or complex. For our limited purposes here, suffice it simply to just say, that there is, in fact, such a methodology, tool and strategy for doing just that long in practical use in the industry. Long in practical use by knowledgeable, experienced and trained eyes and experts, and the successful traders, in the business. If you are, yourself, in fact a provable legitimate trader or authentic practitioner of the petroleum trade (assuming you are actually one) operating in the secondary market, and are truly serious about finding and securing authentic and reliable AGO oil product supply or supplier, or about finding and securing a buyer of equivalent caliber for the product, as the case may be, that’s actually readily within your reach. There’s just really one crucial proviso, only – namely, PROVIDING that you’re equipped with the requisite knowledge, skill, training, tool, methodology and practical experience, by which to undertake the whole process of doing so.

To be sure, true, in today’s world oil deals of the international secondary market, including sourcing for AGO product, which is largely an Internet-dominated world, and is for the most part prevalently awash in fake dealers and scammers, finding duly verified authentic petroleum or automotive gas oil product supply, suppliers and sellers of such caliber (or buyers, just as well), is not ordinary or commonplace. Nor is it at all an easy task to attain. It is, however, by no means impracticable, nor are such suppliers non-existent. Far, far from it! Quite to the contrary, such suppliers abound. It’s only that you just have to search around for such suppliers (or the legitimate buyers, as well, as the case may be) more diligently and skillfully and in the right places from the right sources, and know precisely how and where. That requires, unavoidably, supreme industry knowledge, skills set, training, know-how, connections, precious time expenditure, and experience.



Info coming soon my friend!!

Comments are closed.